DeVillbiss Air Power Company SP-100-F Troubleshooting Guide download pdf (Page 15)

WEEKLY

1. Clean and inspect the compressor air

intake filter; replace if necessary.

2. Inspect condition of drive belt; replace if

necessary.

3. Clean outside partsof the compressoras well as

the engine inorderto maintain efficientcooling.

MONTHLY

1. Check the alignment of the engine pulley to the

flywheel if necessary, alignto within 1/16 inch.

2. Inspectfor and correctany oil leaks.

3. Check drive belttansion adjust if necessary.

4. inspect air lines and fittingsfor leaks; correct as

necessary.

EVERY 50 HOURS OF OPERATION

1. Clean the gasolineengine air cleaner.

EVERY 100 HOURS OF OPERATION

1, Drain and refillthe gasolineengine crenkcase

with clean oil.

2, Clean and setgap or replace spark plug.

3. Clean fuelsediment cup.

EVERY 500 HOURS OF OPERATION

1. Drain and refill compressorcrankcasewith clean

oil.

EVERY 2000 HOURS OF OPERATION, OR IF

A PROBLEM IS SUSPECTED

1. Check condition of compressor pump intake

and exhaustvalves. Replace if damaged or

wornout.

CLEANING THE AIR COMPRESSOR

OUTFIT

The external components of the compressor outfit

shouldbecleaned at leastoncea week. The aircom-

pressorcrankcase and head are designed with fins

whichallowfor propercooling. Clean orblowoff fins

and any other parts of the outfit that collect dirt or

dust. A clean compressor runs cooler and provides

longer service.

CHECKING AND CHANGING OIL

Overfilling with oil will cause premature

air compressor failure. Do not overfill.

1. Check oil level in compressor crankcase

before each use.

For two stage compressorsthe oil levelshould

be to the middle of the oil sight glass.

NOTE

The compressor pump oil must be

changed after the first 100 hours of

operation.

Changing Oil:

1. Remove the oilfill and drain plugs.Collectthe oil

ina suitablecontainer.

2. Replace the oil drain plugand refillthe crankcase

with recommended oil. Refertopage 14of this

manual for recommendedcompressoroil.

NOTE

It is important to maintain the proper

oil level. A low oil level reduces

proper cylinder wall lubrication and

increases ring wear.

Replace the oil fill plug.

Startthe engine and run the compressoroutfit

for several minutes.Shutthe compressordown

and check the oil level. If necessaryadd more

oil.

PAGE 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comments to this Manuals

No comments

DeVillbiss Air Power Company SP-100-F Troubleshooting Guide Page 15

Comments to this Manuals

Related products and manuals for Air compressors DeVillbiss Air Power Company SP-100-F