DeVillbiss Air Power Company 38301-9615 Specifications download pdf (Page 7)

Many air tool users find it convenient to use a Filter to

remove liquid and solid impurities which can rust or

"gum up" internal parts of the tool. A Filter also in-

creases the efficiency and useful life of the tool. Drain

water from the filter periodically. (See Figure 3)

Do not store the tool in cold weather. Frost or ice can

form on the operating valves or mechanisms and the

tool may not operate correctly.

Figure 2

Figure 3

In cold weather operation (near or below freezing), DO

NOT USE a permanent antifreeze such as ethylene

glycol for a cold weather lubricant. This type of anitfreeze

will damage o-rings and seals of the tool.

NOTE

Many air tool users find it convenient to use an Oiler to

help provide oil circulation through tool. An Oiler also

increases the efficiency and useful life of the tool. An

oiler is recommended for tools that receive heavy or

constant use. Check oil level in the oiler daily.

(See Figure 2)

LUBRICATION AND MAINTENANCE

NOTE

Proper lubrication is the owner's responsibility. Fail-

ure to lubricate the tool properly will dramatically shorten

the life of the tool and void your warranty.

NOTE

Excessive oil will damage o-rings and seal of

tool. If in-line oiler is used, manual lubrica-

tion through the air inlet is not required on a

daily basis.

Regulator

Oiler

Regulator

Filter

1. Disconnect the air supply from the tool before

manually lubricating.

2. Turn the tool so the air inlet is facing up and put one

dropof Air Tool Oil, high speed spindle oil, such as

Unocal RX22, or 3-in-1 oil into the air inlet. DO NOT

USE detergent oil or additives. Operate the tool

briefly after adding oil. (See Figure 1)

DO NOT OVER LUBRICATE AIR TOOL.

3. Wipe off excessive oil at the exhaust.

Your tool requires lubrication before you use it for the

first time and before and after each additional use. If

an Oiler is used, manual lubrication through the air inlet

is not required on a daily basis. Lubrication prevents

wear and prevents rust from forming.

Figure 1

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments

DeVillbiss Air Power Company 38301-9615 Specifications Page 7

Comments to this Manuals