DeVillbiss Air Power Company 38301-9615 Specifications download pdf (Page 10)

Disconnect tool from air supply before adjusting,

clearing jams, servicing, relocating and during non-

operation.

Never place your hand, or any part of your body, in the

fastener discharge area of the tool when air supply is

connected to the tool. Serious personal injury may

occur.

LOADING THE TOOL

1. Disconnect air hose.

2. Turn tool upside down so looking at bottom of magazine.

3. Depress the magazine latch. Pull back on the magazine

cover. (See Fig, 5)

4. Insert a stick of fasteners into the magazine. Make

sure the pointed ends of the fasteners are loaded with the

points upward (when tool is upside down). Also make

sure fasteners are not dirty or damagd. Use DeVilbiss

fasteners or equivalent for proper fastener performance.

(See Fig. 6)

5. Push the magazine cover forward until the latch

catches.

Handle the tool carefully, respect the tool as a work-

ing implement and always assume the tool contains

fasteners:

a. Never use the tool as a toy and engage in horse-

play.

b. Never aim or point the tool at anyone. The tool

may contain fasteners.

c. Always keep people and animals at a safe distance

from the work area in case of accidental discharge

of fasteners.

d. Never pull the trigger unless the nose of the tool

against the work surface.

e. Do not pull the trigger or depress the contact trip

when loading the tool.

OPERATING THE TOOL

NOTE

Check and replace any damaged or worn components

on the tool. The safety warning labels on the tool must

also be replaced if they are not legible.

Protect your eyes and ears. Wear Z87 safety glasses

with side shields. Wear hearing protection. Employ-

ers and users are responsible for ensuring the user or

anyone near the tool wear this safety protection.

READ THIS MANUAL AND UNDERSTAND ALL

SAFETY WARNINGS AND INSTRUCTIONS BE-

FORE OPERATING TOOL.

Disconnect tool from air compressor before adjust-

ing, clearing jams, servicing, relocating and during

non-operation.

NOTE

Use DeVilbiss Air Power fasteners or equivalent for

proper performance of tool. See page 15 for fastener

information.

Figure

Click lever.

Staple guide unit.

Staples (Load with points upward)

Magazine

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

DeVillbiss Air Power Company 38301-9615 Specifications Page 10

Comments to this Manuals